|Rebecca Meets Alex Anderson!|
I got to meet Alex Anderson last week at a two-day event sponsored by my local Bernina dealer! On Friday evening we had a "Meet-and-Greet" event -- hors d'oeuvres, book signings, photo ops, and Alex shared a slide show presentation about how she came to be a quilter, with lots of photos of her quilts and a few photos and anecdotes about her family. It was interesting to hear her story of how she got into quilting and teaching and how she became an internationally recognized author and television personality. I enjoyed that.
|Quilt Basket Rendezvous in Batiks, Class Sample Made by Bernina Dealer's Staff|
Then on Saturday morning we came back for an all-day workshop to make a 4-block version of Alex's Quilt Basket Rendezvous pattern, pictured above. My Bernina dealer provided all of the machines for the class, and they assigned me a B 790 machine. At first I was thrilled, since the allure of the brand-new Bernina model B 790 had been tempting me to trade in my B 750. Unfortunately, my dealer did not bring the FHS (Free-Hand System) Presser Foot Lifter bar for any of the student machines. And one of the quirks about all of the 7 Series Berninas is that they do not have a manual presser foot lift behind the presser foot, because that's where the Dual Feed mechanism is housed -- so without the FHS bar, the only way to raise and lower the presser foot on these machines is to press a button awkwardly located on the front of the sewing machine:
I know that Alex was blindsided by this, too, because she had a slide about FHS in her presentation and she was telling us how much we were all going to love using it for machine applique.
Now, when I'm piecing on my vintage Singer Featherweights, of course I don't have a FHS bar to lift the presser foot, so why was it such a big deal that I didn't have FHS on the Bernina 790 I was using for the workshop? With a mechanical sewing machine (as well as with many electronic and computerized models), I still have a great deal of control because the manual presser foot lever is located right behind the foot, within easy reach of your left or right hand. I get my fabric in position, lower the presser foot, and then I can make small adjustments by just barely raising the presser foot with my left hand. Once everything is perfectly aligned for that 1/4" seam, the presser foot clamps the fabric firmly in place as I step on the gas pedal to sew.
|Bernina FHS (Free-Hand System)|
So, the fancy new B 790 machine and I did not get along. This is most likely due entirely to the missing FHS (which is a standard accessory on ALL 7 Series machines) and the missing cloth guide (which is included with all #97 and #97D Patchwork feet) rather than any deficit of the machine itself. Also, I've never taken a class where I used someone else's sewing machine before and I probably am just more comfortable using my own equipment, even if it is a pain in the tushy to have to pack up a large sewing machine and schlepp it off to class with me.
|Bernina Patchwork Foot #97D With Guide|
Although all of the classroom machines were fitted with straight stitch plates and #97D Patchwork feet for piecing, for some reason they did not to give any of us the guide piece that comes with the foot, which is supposed to screw into the bed of the machine. And that guide piece is my favorite piece of the precision piecing puzzle, because -- as Alex said in class -- if you wait until the edge of your fabric gets to the edge of your presser foot to make sure it's lined up perfectly, you're already too late. This metal guide screws right into the bed of the sewing machine, is impervious to movement from the machine's vibration, and is infinitely adjustable to ensure an EXACT 1/4", scant 1/4", or whatever seam allowance you're trying to achieve. If your guide is screwed down in the right position and your fabric is touching the metal guide from the edge closest to you, then sewing a precisely accurate 1/4" seam is virtually goof-proof.
|Piecing with Patchwork Foot #97D, WITH the Guide, on my B 750 QE|
Back to the workshop itself... Well, it was project-oriented, with everyone making the same Basket quilt, and there was a mandatory fabric kit that we all had to pay about $100 for above and beyond the price of the class. Yuck, and more yuck, as far as I'm concerned, but I knew all of this up front and I decided to sign up for the class anyway because -- ALEX ANDERSON! But I should probably never take a class with a kit again. I'm an interior designer, for crying out loud -- I design textiles and pick out coordinating fabrics for a living. The design stage of any quilt is my favorite part of the whole process.
|Boring Mandatory Batik Kit|
Compare my all-batik fabric kit, above, with the bold, vibrant prints that Alex combined in her original version of this quilt, below:
|Alex's Quilt Basket Rendezvous Using Kaffe Fassett Prints|
|My Precut Kit Triangles|
So, disclaimer here -- I have some serious perfectionist tendencies, if you haven't noticed, and that is one of the reasons I enjoy quilting. Perfectionism may be a waste of time in other pursuits, like when you are cooking, for instance. The stew is not going to taste better just because I managed to dice my potatoes and onions into EXACT 1/2" cubes, or because all of my carrot slices measure precisely 3/4" and are cut at a perfect 45 degree angle. But in quilting, the extra time you invest in precision pays off big time. Inaccurate cutting and "good enough" piecing creates a road block for quilters because there comes a point when those tiny errors add up until you eventually hit a brick wall and certain blocks are just "too difficult" for you. So when I am doing my own projects at home, I take the time to straighten and starch my fabrics, cut them as close to perfectly on-grain and as accurately as I possibly can, and then I measure throughout the piecing of every block to ensure that my units and finished blocks come out exactly the size they need to be, without any triangle points cut off or floating where they don't belong. Call me a control freak; I don't care. If a quilt is worth the hundreds of hours I invest in making it, it's worth it to me to do it right and end up with something I can be proud of.
So with all of these factors driving me crazy (including a defective travel iron that I bought the night before especially for the workshop), this is all I managed to accomplish by lunch time:
|My Meager Accomplishments Midway Through the Workshop|
By about 2 PM, I had all four baskets sewn together and I managed to have three of them meet my personal standards of acceptability, but the fourth basket was irredeemable:
|Three Decent Baskets|
I understand why Alex required the dealer to supply kits for the class. Even if there had been a supply list and instructions for what to have cut out and ready to go ahead of time, there are always going to be a handful of people who would show up having made cutting errors, or who neglected to do ANY of their cutting beforehand, and they would hold up the whole class.
Despite my difficulties, I'm really glad that I attended the workshop. As I've said, my two primary objectives were to meet Alex Anderson and to spend some time sewing on the Bernina 790 sewing machine. I got to do both of those things. Alex was great, and although I didn't bond with the 790 machine I was really glad that I got to sew on it in a workshop for 5 hours and find out I didn't like it instead of paying thousands of dollars to upgrade, get the machine home, and THEN discover I didn't like it any better than the machine I already have. Finding out that I prefer the machine I already own was well worth what I spent for the workshop and the fabric kit. Although I was disappointed that my kit was not cut out as carefully as I would have done for myself, I also realize that most normal quilters would have been fine with the kits -- and unless the kits were die cut, it would have taken so much longer to cut them "my way" that they would have had to charge three times the cost for each kit! I am well aware and very appreciative of the great deal of effort that my dealer and his staff exerted in order to pull off this event, going out of their way in so many ways to make all of us feel welcome and comfortable, cutting and assembling the kits and trying to make everything as clear and streamlined as possible for us. They gave me the machine that I requested to sew on, and situated me right up at the front of the room as I had requested, as well. They had name tags for everyone, rented an excellent facility for the event, and had plenty of staff on hand to help with machine issues (like helping me turn off the bleeping hover feature) so that we could concentrate on our projects. We had wonderful lunches from McAlister's Deli, and although I didn't know any of the other students at the start of the class and I was the youngest person there by several decades, everyone was very welcoming and inclusive towards me. Some nice ladies from Rock Hill, South Carolina invited me to eat lunch with me and encouraged me to come to one of their guild meetings. And I just might take them up on it!
And now, back to my pineapples!